HD Video Recording – on a budget

This post is a bit different – it has nothing to do with Power Music (my day job at Cambron Software) and looks at a project I am involved with in my spare time – setting up an HD video recording system in my church.

I am a member of Westwoodhill Church, a local independent church in East Kilbride. My “job” in the church is to look after the AV side of things – equipment, software and people. You know the people that sit up the back of the church and get the blame when anything goes wrong! As well as managing song projection, sound desk, PowerPoints and DVDs, we video record most services in the church so that members and others who can not attend church due to ill health or other commitments can view the Sunday services.
This article is about how we moved from an outdated and pretty ropey analogue recording system to a modern digital HD system – on a very low budget.


Before we started on our move to digital I asked around what the typical spend on a new digital recording system might be. I was horrified! Anything from £20,000 for a “basic” system to £500,000+ in a mega church! We were definitely going to have to come up with some creative solutions to keep the system to a sensible budget for our church!

A bit of the history

For about the last 15 years we have been recording services and events in our church. All our setups have been done by ourselves on low budgets!

Beginnings

It all started way back in 2002, when we purchased a Sony pan-tilt mount and a second hand Canon Video8 camcorder on eBay, which had a LANC connector for zoom control and a composite video output. The Canon camera had a faulty internal tape recording system but that didn’t matter as we were only using the optics and the video output. We recorded straight onto VHS tapes using a domestic video recorder and duplicated tapes (when required) by tape-to-tape copying using a second video recorder – you can imagine what the quality of the second generation copies were like!

Improvements

Then in 2006 the church had a dedicated AV area constructed at the back of the church for the sound desk and the PCs for PowerPoint and song words projection. This is where we built our first “real” recording setup.

Here it is…

We bought a slightly better quality camcorder (again with a broken recording system!) and fitted it to the Sony pan-tilt mount. We used SD composite video, through an analogue mixing desk and recorded onto a Samsung hard disk/DVD recorder. We could fade between the output from the PC running Power Point or song projection and the camera output. We had two 5 inch LCD screens, one for “Preview and Queue” and the other for the “Live Program”. This is what we used to record services up until August 2017, and it worked very well. The quality at the time was OK and duplicating DVDs gave much better copies than VHS tape.

All this kit was sourced on eBay or through second hand stores on the web, and was installed by ourselves. I think the total cost was less than £800.

However since 2006, the world of video had moved on, and compared to modern HD recordings the quality of what we were producing was starting to show its age. Also some of the components were starting to show their age as well! Also we really wanted to move from physical DVDs, which took time to duplicate (and got lost!), to online video storage using YouTube.

The new digital system

So the decision was made to scrap the existing system completely and move to a fully digital HD recording setup with the services available on our church website from our YouTube channel. As before we were determined to DIY on as small a budget as we could manage but get as good quality as possible.

So here’s what we ended up with…

The whole setup cost under £2000! The main reason for the incredible low cost of the system was that we picked up 2 second hand HD-SDI PTZ security cameras on eBay for £160. It was a risk as we had no way of knowing the quality of the cameras, and the new price of these cameras was over £600 each, however it turned out they worked pretty well!

We chose the vMix software application for mixing and recording as it is very powerful, easy to use and has a good reputation for use in church environments like ours.

We have NDI on a PC running ZionWorx which is used for words projection and PowerPoints. We also run NDI on another PC used for playing streaming video and DVDs as ZionWorx does not allow this at present. NDI allows us to mix and overlay or picture-in-picture PowerPoints or videos used by the speaker into the recording in the vMix software.

The two cameras are PTZ (pan-tilt-zoom) outputting full 1080p HD over SDI, with 20x optical zoom, controlled by an RS485 joystick PTZ controller. They output SDI which is an industry standard for professional broadcast cameras. One camera is mounted on the back wall for a straight on, head shot and the other is mounted on the side wall for an alternative wide angle shot.

The computer we chose was a “refurbished” (it looks brand new) high-end HP workstation with an 8-core Xeon processor, 16GB RAM, a 128GB SSD and a 2TB conventional HD for storing the library of video recordings. We bought this from Bargain Hardware. A good graphics card was required so a GEFORCE GTX 1050 was installed in the HP workstation. The Z620 is not the newest of workstations, it was launched back in 2013 and at the time it was one of the most powerful PC available. However it delivers ample power to run the vMix software, has lots of PCIe expansion slots for the capture cards and is rock solid running Windows 10 Professional 64bit.

The SDI video is captured from the cameras by a pair of AVerMedia DarkCrystal 110 PCIe capture cards. We also have an HDMI capture card for capturing video from an additional source, for example another camera or a visiting speaker’s laptop. We can also capture video and sound from an iPhone running NDI over the WiFi network.

Sound is captured directly into a Behringer USB mixer from the main mixing desk, and a pair of stereo microphones is used to pick up congregational singing and music from the band.

All the PCs are connected together on wired Gigabit Ethernet LAN.

So what did we spend?

Here’s a breakdown of what we ended up spending. Obviously there are no labour costs as we did all the installation ourselves. We are very fortunate to have several very competent engineers in the church!

Costs

HPZ620 Xeon 8-core, 16GB RAM, 128GB SSD, 2TB HD, GEFORCE GTX 1050£800
24 inch monitor£100
VMix HD Video mixing software£250
2 x SDI Capture cards single PCIe£120
2 x PTZ cameras HD-SDI (refurbished) £160
HDMI to USB 3.0 Capture card£100
Stereo pair microphones and USB mixer£150
PTZ RS485 camera controller£50
Camera power supply £50
Cable, trunking, network bits and pieces etc£200
Total£1980
Story so far…

We have recorded about half a dozen sermons on the new system, at the time of writing this article. We have had a few teething problems – mainly to do with sound quality and what video bitrate to use. We also had an issue with flickering due to the discharge lighting used on the stage, but this was solved by changing the frame rate of the camera to 100 fps. We are very happy with the results we are getting now and we have had very positive feedback from people viewing the YouTube videos. My next task is to train up a group of people to operate the system and get a rota setup for the recording.

You can see our efforts on the church website in the Sermons section:

westwoodhillchurch.org.uk

If you have any comments or questions I would be happy to hear from you.

13 thoughts on “HD Video Recording – on a budget

  1. Hi Gordon, I was very interested to see your setup. I’m looking to do something quite similar for our small fellowship to stream to YouTube and record locally on a hard drive. I’m trained as a sound engineer, with a fair bit of experience in the past with analogue video production systems, but not recently or with digital systems. Instead of using SDI, however, I’m looking at the possibility of IP cameras, so that they and all other video inputs can be picked up in vMix directly through a Gigabit Ethernet switch. And also using NDI for a presentation PC to feed into vMix also on the network, and a NDI mobile phone too for if ever we need it. Did you consider IP cameras instead of SDI? I wonder if a mid-range laptop with (with dual hard drives for recording and) just a Gigabit Ethernet connection for streaming inputs as well as the streaming output to the router (via the Ethernet switch). The cameras wouldn’t need to be controlled much, but remain static, so a software IP controller would suffice. The only other gear required would be a phono/USB interface for the audio from the sound desk. It seems that IP cameras have been mainly used for CCTV or webcam use, but there are some recently which are broadcast quality too (e.g. PTZOptics) but which are relatively expensive. Do you have any thoughts or advice?

    1. Hi John
      Sounds like you know what you are doing! We did not consider IP cameras as we were worried about latency and we picked up the 2 SDI cameras so cheaply! If you are hard wiring them on Gigabit ethernet there should not be a problem. There would only be an issue if you were using WiFi – I think. The optics and the CCD in modern security cameras is as close to “broadcast” quality as I needed! The difference in price is huge between those sold as security cameras and those sold as broadcast cameras. If you can get an IP camera with an RS485 control it would be good. You will find that a static camera is very frustrating!
      My only worry about the laptop would be the graphics capability. You really need a dedicated graphics card to run vMix successfully. Most laptops just use the integrated Intel graphics which is fine for normal use but would struggle with HD video recording. You also need quite a beefy processor – at least an i5 or preferably an i7 and watch out for “mobile” processors they are much less powerful than the desktop variety.
      Hope this is helpful – I am no “expert” just what my experience has taught me!
      Let me know how you get on.

  2. Hi Gordon,

    That’s great. Thanks. Your comment about the optics and CCD in CCTV cameras is very helpful. I’ve been looking at some of the specifications of the optics/CCD in PTZOptics or HuddleCam products and those in CCTV cameras, and they seem to be very similar – at least the CCD size and pixel count is equivalent, although I’m not able to tell whether the lens sizes are equivalent. My main concern is that a CCTV lens might introduce too much distortion on the image, possibly due to using too small a lens.

    And yes, while the cameras might remain static a lot of the time, I definitely don’t want to go for a static camera, but want to use PTZ cameras.

    WiFi is not an option for IP cameras, we’ll use a wired Ethernet connection.

    Yes, the computer specs are important, but I’m just wondering what the threshold is for computer specification for a basic system. Your link to where you got your PC from is very helpful.

    One last question, you purchased the more expensive version of vMix, rather than the HD Basic – were there any reasons for that, since it seems that you only have two cameras and the basic version allows for four inputs (three of them being cameras)?

    Thanks again.

    1. Hi John
      We went for the more expensive HD version of vMix as it is my understanding that an input is not just a camera. The lower third title is an input as is an NDI connection to another PC and we have 2 NDI connections.
      See here: https://www.vmix.com/knowledgebase/article.aspx/74/what-does-total-inputs-and-capture-inputs-mean-in-each-edition. We have 2 x cameras, 2 x NDI inputs, a title, audio input and an HDMI converter input. And we might expand this in future. I hope this explains why we needed the HD version. I think for the price it is an amazingly powerful piece of software. Ten years ago I would never have dreamt that we could afford a full HD digital recording system.

  3. Hi Gordon,
    That’s helpful – we’re looking at two possibly cameras, title and one NDI input from another PC, so the HD Basic would suffice to start with. We could always upgrade if needed later. Yes, vMix is really powerful and at great prices too.
    Thanks again.

    1. Hi John
      You asked me for the spec of the PC we used – here it is. We purchased a “refurbished” HP Z620 workstation which appeared to be brand new – still with plastic sheets on the surfaces. The technology is slightly older but the performance to price was very good. You can get suggested specs on the vMix site here: https://www.vmix.com/products/vmix-reference-systems.aspx#emerald The benchmark for the processor we used (Xeon E5-2650) was 10,155 compared to the Emerald vMix system processor (i5-7500) of 8,099.
      Processor: Xeon 8-core E5-2650 2.00GHz
      RAM: 16GB DDR3 ECC
      SSD: 128GB Samsung
      HD: 2TB Western Digital
      Optical: DVD RW
      Graphics: GEFORCE GTX 1050
      OS: Windows 10 Pro 64 bit
      Total cost approx £800

  4. Hi Gordon,
    Great, thanks for those details. The PC supplier doesn’t offer the GEFORCE graphics card any longer, and I’d prefer to have a 2GB graphics card, so I’ll probably get one elsewhere and select no graphics card for the order.
    Now that the PC specs are clear, the only thing left is the difficulty of trying to find a decent PTZ IP camera which will not break the bank and give 1080p 30fps with a good lens with decent optical zoom.
    Getting there…
    Thanks again for your help.

    1. Hi Zino
      I have no idea what make or model of PTZ cameras they are. They are generic Chinese made SDI-HD PTZ Dome Security cameras. The camera module is made by Sony.
      Cheers
      Gordon

  5. hello
    we would like to use ptz cameras to show our services live on screen currently we are using open lp for biblical scripts but want cctv to be intergrated either using an encoder or software as vmix

    current setup
    laptop ( open lp ) —hdmi —> to monitors

    we want
    ptz camera >>> pc with vmix >>> to monitors

    or

    ptz camera >>> nvr >> encoder/decoder >> monitors
    |
    laptop open lp

    please assist

  6. Hi, not sure how I came across this post, I was looking into NDI setting up a Video LAN on google and this page popped up.

    I am very impressed in the way in which your church has setup itself, very professional, the use of hardware and software etc.

    Can you please tell me how you setup your webpage, what software was used etc. I was extremely impressed in how it presents itself on mobile devices, and how difficult is it to maintain,

    Many thanks for help/

    1. Hi Matt
      Thanks for the comments! Our Church website is just a WordPress site with a skin from ChurchThemes.com (Resurrect) Very easy to upload links to sermons on YouTube.
      Cheers
      Gordon

Leave a Reply

Your email address will not be published. Required fields are marked *